discuss the design and operation or various types of incinerators

The proposed incinerators shall be able to be completely packed into a series of 20ft export standard sea containers.
Incinerators must  be able to support different power sources (PV solar system , diesel Electric generator , local or  compound mini-scale grid)
All electrical connections attached with the incinerator and other machinery should be provided with suitable and necessary safety devices and be protected by steel conduits, cable trays, and supports.
what is an incenerator
inceration
what is incinerator
china hospital waste incinerator
sanitary pad incinerator
industrial waste incinerator manufacturers
The manufacturer should permanently mark on the incinerator indicating: (i) manufacturer’s name or trademark (ii) style, type, model or, date of manufacture of the incinerator (iii) capacity in terms of net designed heat release in heat units per timed period (i.e., British Thermal Units per hour, mega joules per hour, kilocalories per hour).
“The unit shall be supplied with a lockable operations store, that shall be initially supplied with the following consumables:
• A first aid kit, suitable for addressing the hazards presented by the unit.
• 5 full sets of personal protective clothing and equipment.
• Operating logbooks.
• Unit cleaning equipment.
• Unit routine maintenance equipment and associated spare parts.
• Lubricants as appropriate.
• 3 Fire extinguishers.
• Any other consumables considered necessary by the Supplier.

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: sales@hiclover.com
Email: hicloversales@gmail.com  

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC)
Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour
Control Mode PLC Auto. PLC Auto. PLC Auto. PLC Auto.
Combustion Chamber 100L 210L 330L 560L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm
Secondary Chamber 50L 110L 180L 280L
Smoke Filter Chamber Dry Scrubber Dry Scrubber Dry Scrubber Dry Scrubber
Feed Mode Manual Manual Manual Manual
Voltage 220V 220V 220V 220V
Power 0.75Kw 0.83Kw 0.99Kw 1.2Kw
Diesel Oil Consumption (kg/hour) Ave.8.4 Ave.10.9 Ave.13.3 Ave.16.9
Natural Gas Consumption (m3n/hour) Ave.10.1 Ave.13 Ave.16 Ave.20.2
Temperature Monitor Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes
Items/Model TS100(PLC) TS150(PLC) TS300(PLC) TS500(PLC)
Burn Rate (Average) 100 kg/hour 150 kg/hour 300 kg/hour 500 kg/hour
Control Mode PLC Auto. PLC Auto. PLC Auto. PLC Auto.
Combustion Chamber 1200L 1500L 2000L 3000L
Internal Dimensions 120x100x100cm 150x100x100cm 170x120x100cm 210x120x120cm
Secondary Chamber 600L 750L 1000L 1500L
Smoke Filter Chamber Dry Scrubber Dry Scrubber Dry Scrubber Dry Scrubber
Feed Mode Manual Manual Manual Manual
Voltage 220V 220V 220V 220V
Power 1.38Kw 1.69Kw 2.57Kw 4.88Kw
Diesel Oil Consumption (kg/hour) Ave.20.4 Ave.24.2 Ave.33 Ave.44
Natural Gas Consumption (m3n/hour) Ave.24.5 Ave.29 Ave.39.6 Ave.52.8
Temperature Monitor Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes

CONTAINERISED WASTE INCINERATOR


CONTAINERISED WASTE INCINERATOR

Incinerator Items/Model

HICLOVER TS150(PLC)

Picture

 

Burn Rate (Average)

100-150 kg/hour

Feed Capacity(Average)

300kg/feeding

Control Mode

PLC Automatic

Primary Combustion Chamber

1500Liters(1.5m3)

Internal Dimensions

1500x1000x1000mm

Secondary Chamber

750Liters(0.75m3)

Smoke Filter Chamber

Wet Scrubber

Feed Mode

Manual/Mechanical

Voltage

415V 3P

Power

10.0Kw


3.1. THE PRESENT SITUATION IN SOUTH SUDAN IS HOSTILE, UNPREDICTABLE AND TO COMPOUND THE CHALLENGES, LOGISTICS BECOME DIFFICULT DURING THE RAINY SEASON (TYPICALLY MAY TO OCTOBER). DESPITE THE SECURITY SITUATION AND THE YEARLY RAINY SEASON, THE VENDOR SHALL SUPPLY AND DELIVER THE REQUESTED EQUIPMENT/SPARE PARTS AND PROVIDE SUPPORT SERVICES                                                                                                                                 
Manufacturers : 4.1. THE CONTRACTOR SHALL ENSURE THAT THE ITEMS DELIVERED ARE CONSISTENT WITH THE ITEMS REQUESTED BY UNMISS AND COMPLY WITH THE REQUIRED SPECIFICATIONS.  4.3. THE VENDORS SHOULD NOTE THAT THE SUPPORT SERVICES TO BE PROVIDED SHALL BE CONSISTENT WITH THE SERVICES REQUESTED BY UNMISS.    2  
   2 
QUALITY STANDARDS
7.1. ’THE WASTE INCINERATOR SLIOULD BE MANUTACTIIRCD BY AN ISO 9001:2015 OR EQUIVALENT STANDARDS CERTIFIED COMPANY.
7.2. THE  WASTE INCINERALOR SLIOULD INCORPORATE AN AIR POLLUTION CONTROL SYSTEM CONFORMING TO EU BASIC EMMISSION STANDARD OR ITS EQUIVALENT AS WELL AS HEALTH AND SAFETY SYSTEMS OF INTERNATIONAL STANDARDS.AGRICULTURAL WASTE INCINERATORS WITH A LOADING BAY EQUIPPED WITH A WASTE FEEDER RAM TO ALLOW FOR CONTINUOUS LOADING OPERATION 
INCINERATOR SPECIFICATIONS
THE VENDOR SHALL BE RESPONSIBLE IVOR THE SUPPLY. DELIVERY, INSTALLATION, AND COMMISSIONING OT’TLIE WASTE INCINERATOR AND ALSO FOR PROVIDIRLG COMMISSIONING AND OPERATIONAL TRAINING .TO THE OPERATORS. THE REQUIRED SPECIFICATIONS FOR WASTE INCINERATORS ARE:
6.  HAVE VERY LOW LEVELS OF UNBUMED MATERIAL IN THE SLAG.
7.  SHALL BE USER FRIENDLY AND AS LABOR FREE AS POSSIBLE, EASY TO USE AND OPERABLE BY TRAINED OPERATOR OR UNSKILLED OPERATOR.
INCINERATOR SPECIFICATIONS HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project. 
We supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, clinic, hospital, medical center, hygiene clinical waste destruction with medical disposable, biological waste, medical plastic waste, hazardous waste, red bag waste, needle disposal, gauze and bandages, sealed sharp containers, pathological waste, trace-chemotherapeutic wastes, etc. 
8.  AS MUCH AS POSSIBLE, PRODUCE END-PRODUCTS AND BY-PRODUCTS WITH MINIMUM NEGATIVE IMPACT ON THE ENVIRONMENT AS PER INDUSTRY BEST PRACTICES.
9.  HIGH EASE OF INSTALLATION AND OPERATION WITH ROBUST AND USER-FRIENDLY INSOUMENTATION AND CONTROLS INCLUDING CLEARLY READABLE SYSTEM OPERATION PANELS..                                                                                                                                                      10.  IT SHALL BE CAPABLE OF HANDLING FOOD WASTE MIXED WITH NON-RECYCLABLE WASTE. IT SHOULD ACCOMMODATE LARGE VARIATIONS IN WASTE COMPOSITION AND CALORIFIC VALUE.
11.  ALLOW FOR CONTINUOUS LOADING.
INCINERATOR SPECIFICATIONS :
12.  SHALL BE ECONOMICAL TO OPERATE AND MAINTAIN AND HAVE .A LOW AND EFFICIENT FUEL CONSUMPTION. BIDS SHOULD INCLUDE THE FUEL CONSUMPTION AT THE RATED CAPACITY .
13.  SHALL INCLUDE A DETAILED OPERATION AND MAINTENANCE MANUAL IN ENGLISH. IN ADDITION, THE MANUAL MUST HAVE TROUBLESHOOTING AND DETAILED DESCRIPTIONS AND PICTURES OF THE INDIVIDUAL COMPONENTS OF THE INCINERATOR   8  
TECHNICAL SPECIFICATIONS: INCINERATOR:
A.     LIFETIME OPERATION FOR A MINIMUM PERIOD OF 10 YEARS IN A TROPICAL ENVIRONMENT,                                                                                                               B.    FEATURE A COMBUSTION CHAMBER UP TO MAXIMUM 1.5M3
C.  NOMINAL BURNING RATE SHALL BE UP TOL00 KG/H WITH 8 HOUR DAILY OPERATING CYCLE OF ASH REMOVAL, PRE-HEAT AND BURN WITH CONTINUOUS LOADING,
D.   POWER SHALL BE TYPICALLY SUPPLIED BY EITHER DIESEL GENERATOR, THE LOCAL GRID OR A COMPOUND .SCALE MINI GRID. ELECTRICITY IS NEEDED TO RUN THE FANS, BLOWERS, .THE DISPLAY READOUTS IN THE CONTROL PANEL, ETC. WHILE DIESEL FUEL IS USED AS A SUPPLEMENTAL FIIEL FOR INCREASING THE FEEDSTOCK CALORIFIC VALUE, BUNTERS WILL .ONLY .ACTIVATE WHEN AND IF REQUIRED (DURING PREHEATING OF THE PRIMARY CHAMBER AND IF NEEDED LATER TO REACH THE 850C, FOR SHORT INTERVALS.)   9  
   9 
TECHNICAL SPECIFICATIONS: INCINERATOR:
E.  INCLUDE A SUPPLEMENTAL FUEL SOURCE AND STORAGE UNIT E.G. DIESEL TANK) OF AT LEAST 1,000 LITERS,
F.  THE BURNERS SHALL BE FITTED WITH LOW NOX TECHNOLOGY TO ENSURE A COMPLETE AND CLEAN BURN CYCLE,                                                                                   G.  THE WASTE INCINERATORS SHALL BE DESIGNED FOR 3 PH, 4 WIRE, 415VAC, +-3% ELECTRICITY SUPPLY,
H. MUST HAVE DUAL COMBUSTION CHAMBERS THAT CONFORM TO A MINIMUM GAS TEMPERATURE OF 850  C WITH A 2-SECOND RETCNTION OF FIRE GASES FOR SECONDARY CHAMBERS.  10  
   10 
TECHNICAL SPECIFICATIONS: INCINERATOR:
I.  HAVE A MINIMUM THERMAL EFFICIENCY OF’85%,
J.  GENERATE RESIDUAL INCINERATOR ASH CONFORMING TO <L0%1Y VOLUME AND <25% BY WEIGHT OF THE WASTE INCINCRATED,
K.  ACHIEVE A TOTAJ ORGANIC CARBON (TOC) CONTENT IN THE SLAG AND BOTTOM ASHES OF LESS THAN 5%,
L.  ALL METAL SURFACES (EXCEPT COMBUSTION CHAITLBER INTERNAL FITTINGS) SHALL BE EITHER GALVANIZED, CNAMELED, PAINTED, OR OTHERWISE TREATED AGAINST ATMOSPHERIC AND PROCESS INDUCED CORROSION.
M.  PRIMARY AND SECONDARY CHAMBERS SHALL PREFERABLY HAVE ROUNDED INSIDE CORNERS TO AVOID THE I(I1NIATION OF DEAD ZONES OR COLD POCKETS.
N.  COMBUSTION EFFICIENCY (CF’I) AT LCFLST 99% WITH ADEQUATE CAPACITY BURNERS IN SUFFICIENT NUMBER FOR THE VOLUME OF THE PRIMARY CHAMBER TO ENSURE EFFECTIVE OPERATIONS.   11  
TECHNICAL SPECIFICATIONS: INCINERATOR:
O.  INCINERATOR UNITS SHALL INCLUDE AN INTEGRAL AND MECHANIZED BOTTOM ASH REMOVAL SYSTEM
P.  ALL THE MEASURING DEVICES ATTACHED WITH THE INCINERATOR SHOULD HAVE DIGITAL DISPLAY AND SHOULD HAVE PT OVISION OF CONNECTING TO THE RECORDING SYSTEM, WHICH SHOULD INCLUDE FUEL METER AND SEPARATE ENERGY METERR.
Q.  INCLUDE DESIGNED POLLUTLON CONTROL DEVICES SUCH AS SCRUBBERS, FILTERS, OR ELECTROSTATIC PRECIPITATORS TO ACHIEVE EU EMISSION LIMITS AS PART OF AIR POLLUTION CONTROL SYSTEM SUITABLE FOR EMISSION CONTROL.
R. EACH UNIT SHALL INCLUDE A COMPLETE VERTICAL EXHAUST AND STACK SYSTEM 6 TO 12 M ABOVE GROUND LEVEL WITH EXHAUST EXIT VELOCITY OF NOT LESS THAN 10 METERS PER SECOND
S.  THE CONTROL PANEL SHOULD BE AT LEAST 1P54 RATED   13  
   13 INCINERATOR SPECIFICATIONS 
1. SHALL BE COMMON, WELL-PROVEN AND CLEAN TECHNOLOGY BOTH AS A COMPLETE UNIT AND IN TERMS OF ITS INDIVIDUAL COMPONENTS.
2. SHALL BE ROBUST, STURDY, AND CAPABLE OF INSTALLATION IN REMOTE LOCATIONS SUBJECT TO SEVERE AND HARSH CONDITIONS.
3. SUITABLE FOR MODULAR APPLICATION INCLUDING SLAPPING AND TRANSPORT.
4. FLEXIBLE AND MOBILE LO ALLOW FOR ON-SITE TIEATMENHOPERATION —MUST BE CONTAINERIZED.                                                                                                      5. RELIABLE AND ROBUST TOTAL INCINERATION PROCESS.CONTAINERISED WASTE INCINERATOR
INCINERATOR UNIT COMPLETENESS, SIZ.E AND EFFIEIENCY :
THE PROPOSED INCINERATOR UNITS MUST BE COMPLETE AND INCLUDE ALL THE KEY FEATURES LISTED BELOW AND ALL THE ASSOCIATED SUPPORT SERVICES AND INTERCONNECTIONS TO MAKE IT FUNCTIONAL AND OPERATE OPTIMALLY.
THE FORECASTED FEEDSTOCK LOADS, AND DAILY LOADING RATES ARE GENERALLY SUMMARIZED AS:
A.  PRIMARILY FOOD WASTE AND PACKAGING WITH AWIDC RANGE OFCALORILIC VALUES AND DENSITIES. THE CONTENT OF THE CONBUSTIBLE MATTER WILL BE ABOVE 60% AND .MOLSTTIRE CONTENT UP TO 70%.
B.  WASTES EITHER SMALL ENOUGH TO FIT WITHLN A 60-LITRE WASTE SACK OR BROKEN UP OR SHREDDED TO LESS THARI 300MM IN SIZE.
C.   OPERATION ON A DAYIINE SHFT BASIS . 5 DAYS PER WEEK    14  
   14  DEYELOP AN OPERATING PROTOCOL.FOR UNMISS NOMINATED STAFF TO USE FOR OPERATIIIG THE UNITS.
UNPACKING, INSTALLÄTION, AND COMMISSIONING OF THE UNITS:
ALL ASSOCIATED FITTINGS AND CONNECTIONS TO ENABLE FULL IIMCTIONALITY SHALL BE COMPLETED BY THE CONTRACTOR IN LINE WITH THE MANUFACTURER’S INSTRUCTIONS; ILICLUDING BUT NOT LIMITED TO PIPING, ELECTRICAL AND STACLC CONNECTIONS, FOUNDATIONS, ANCHORAGE TO FOUNDATIONS, AS APPLICABLE,
UNMISS SHALL PROVIDE 4HE TEMPORARY PROVISION OL’A FORKLIFT, LIGHT CRANE, TOOLS OR ANY ASSOCIATED MOVING AND LIFTING LNACLBNERY,
INCINERATOR UNIT COMPLETENESS, SIZ.E AND EFFIEIENCY :
D. AN 8 HOUY DAILY OPSRATIIIG CYCLC OF ASH REMOVAL, PRE-HEAT AND BURRT WITH CONTINUOUS LOADING. THE AUTOMATED BURN COMPLETION AND COOL DOWN CYCLE WILL TAKE PLACE OVEMIGHT.
E.  THE INCLNERATORS SHALL BE CAPABLE OF USING DIESEL DUEL AS A SUPPLEMENTAL FUEL WHILE THE ASSOCIATED MANAGEMENT EQUIPMENT SHALL BE CAPABLE OF USING ELECTRICITY AS THE PRIMARY POWER SOURCE.
F.  PERFORMANCE SHALL MEET EU EMISSION STANDARDS OR EQUIVALENT INTERNATIONAL EMISSION5 STANDARDS                                                                    THE INCINERATORS TO BE PROCURED WILL CONFORM THE FOLLOWING SIZE CAPABILITIES TO MNNAGE THE F’ORECAST FEEDSTOCK LOADS AND DAILY LOADING RATES AND MUST BE EFFICIENT IN ITS DEMAND FOR FUEL ALID OTHER UTILITIES.  15  
The incinerator burn waste in primary combustion chamber and burn the smoke from primary combustion chamber again to make sure environmentally friendly with no black smoke, smelless, reduce pathogenic bacteria infection. 
System solutions for medical waste environmental, including waste incineration, smoke emission treatment, high-temperature sterilization, ultraviolet sterilization lamp, waste shredder, needle destroyer, medical waste package, sharp containers, etc. 
The pet cremation equipment humanized design with movable platform, small space covers for modern pet cremation business owner all over the world. 
QUALITY STANDARDS
7.5. THE UNMISS ELIGINEERING SECTION WILL ASSIGN A REPRESENTATIVE/S TO SUSPECT THE ITEMS DURING DELIVERY TO ENSURE THAT MATERIALS/PRODUCTS PROVIDED ARE OF TIRE REQUIRED QUANTITY AND QUALITY INDICALED IN THE CATALOGUES/BROCHURES..                                                                                                                                    7.6. ANY DISCREPANCIES IDENTITIED DURING THE INSPECTION AND RECEIVING PROCESS WILL RESULT IN THE REJECTLON OF THE ITEMS BY UNMISS.
7.7. REJECTED ITELNS/PRODUCT.S SUPPLIED BY THC CONTRACTOR SHALL BE REPLACCD AT THE COST OF THE CONTRACTOR. THE CONTRACTOR SLIALL BE RESPONSIBLE FOR ENSURING THAT THE ITEMS/PRODUCTS ARE REPLACED WITHIN A MAXIMUM PERIOD OF SIXTY (60) CALENDAR DAYS.
7.8. ALL ITEMS/PRODUCTS SHALL HAVE A MINIMUM WARRANTY PERIOD OF TWO (2) YEARS   4  
CONTAINERIZATION :
THE PROPOSED INCINERATORS SHALL BE BUILT INTO STANDARD 20FT ISO CONTAINERS.OR ALTERNATIVELY BUILT INTO SIMILAR FOOTPRINT COMPLETE WITH ISO LOAD HANDLING FACILITIES (HOOLCS, EYCLETS, ETC). THE NUMBER OF CONTAINERS/CONTAINER SIZED MODULES REQUIRED FOR EACH UNIT IS AT.THE DISCRETION OF THE CONTRACTOR.
EACH CONTAINER SHALL BE PAINTED WHITE WITH THE “UN” LOGO PAINTED IN BLACK. UNMISS WILL PROVIDE THE PRECISE SPECIFICATIONS FOR PAINTING PRIOR TO CONTRACT AWARD    16  
CORROSION RESISTANCE AND WEATHER PROOFING:
THE INCINERATOI UNITS SHALL BE DESIGNED TO LAST IN OPERATION IN, A HARSH ARID ENVIRONMENT FOR A MINIMUM PERIOD OF 10 YEARS IF THE SPECIFIED MAINTENANCE SCHEDULE IS FOLLOWED. ALL METAL SURFACES (EXCEPT COMBUSTION CHAMBER INTERNAL FITTINGS) SHALL BE EITHER GALVANIZED, ENAMELED, PAINTED OR OTHERWISE TREATED AGAINST ATMOSPHERIC AND PROCESS INDUCED CORROSION AS WELL AS EXTREMELY HIGH TEMPERATURES AND HARSH WINDS.   THE INCINERATOR COMBUSTION CHAMBER(S) SHOULD BE DESIGNED FOR EASY MAINTENANCE OF ALL INTERNAL PANS INCLUDING THE REFRACTORY AND INSULATION. MATERIALS USED IN THE INDIVIDUAL PARTS OF THE INCINERATOR SHALL BE HEAT RESISTANCE AND BE PROTECTED AGAINST OXIDATION AND CORROSION.    17  
   17 
CORROSION RESISTANCE AND WEATHER PROOFING:
THE INCINERATOR SHELL SHALL BE MADE OF MILD STEEL WITH AN ADEQUATE TLIICLCNESS (MINIMUM..3 MM) AND PAINTED EXTERNALLY WITH HEAT RESISTANT ALUMINUM PAINT SUITABLE TO WITHSTAND 250 C. THE OUTSIDE SURFACE TEMPERATURE OF THE INCINERATOR EASING SHOULD NOT EXCEED 50°C ABOVE AMBIENT TEMPERATURE AND SHALL INCLUDE A SAFETY MESH AROUND ALL HOT SURFACES. HIGH QUALITY COLD FACE REFRACTORY LINING OF CALCIUM SILICATE OR SUPERIOR MATERIAL, MINIMUM THICKNESS 100 MM..   18  
   19 DECOMMISSIONING, OVERHAUL, AND REPACING OF THE UNIT:
BASED UPON A POTENTIAL NEED FOR AN INCINERATOR UNIT TO BE IIIOVED TO A NEW LOCATION THE CONTRACTOR WILL OUTLINE THE KEY STEPS THROUGH A CLEAR WRITTEN PROCEDURE AND DIRECT OR REMOTE DEMONSTRATION BY THE CONTRACTED OPCRATOR FOR THE DECOMRRIISSIONING AND REPACLCING OF THE UNITS, SO THIS CAN BE ACHIEVED.
EAOH INCINERATOR SLIALL BE SUPPLIED WITH ALL NECESSAIY ASSCMBLYJDISASSENIBLY AS WELL AS MAINTENANCE TOOLS.
WASTE FEEDER RAM:                                                                                                         THE UNIT SHALL INCLUDE A HORIZONTAL AXIS HYDRAULIC RAM FEEDER FOR PUSHING THE WASTE FROM THE LOADING BAY INTO THE PRIMALY .CHAMBER. THE RAM FEEDER CONFIGURATION SHOULD AILOW FOR THE ADDITION OF WASTE DURING THE BURN CYCLE..  20  
   19 
COMBUSTION CONTROL SYSTEM :-
THE INCINERATOR UNITS SHALL INCLUDE A TELNPERATURE BASED ELECTRONIC COMBUSTION CONTROL SYSTEM THAT UTILIZES TEMPERATURE AND OTHER DATA TO INFORM AUTOMATCD OR PROGRAMMED CYCLING THROUGH THE STANDARD BURN CYCLE: PRE-HEAT, BURN WITH WASTE ADDITION, BURN COMPLETION, COOL-DOWN. THE SYSTEM SHALL BE CAPABLE OF VARYING AUXILIARY FUEL AND AIR SUPPLY IN BOTH COMBUSTION CHAMBERS TO ACHIEVE OPTIMUM COMBUSTION CONDITIONS. AS FAR AS PRACTICABLE, THE INCINERATOR SHALL BE OF A PLUG AND PLAY TYPE FOR EASE OF INSTALLATION AND COMMISSIONING IN REMOTE LOCATIONS.
THE CONTROL SYSTEM SHALL HAVE A SEPARATE PUSH BUTTON-BASED WORKSTATION, WHICH.SHALL BE LOCATED ADJACENT TO THE LOADING BAY AND PROTECTED FROM WEATHER AND IMPACT DAMAGE. .THE SYSTEM SHALL ALLOW F’OR RAPID ARID STRAIGHTFORWARD INTE ENTION BY THE OPERATOR IF THE AUTOMATIC SYSTEM IS-NOT ACHIEVING THE DESIRED RESULTS DURING A BURN CYCLE..   20  
   21 7.3. INCINERATION STANDARDS: THE SYSTEM MUST BE DESIGNED TO MEET THE APPJICABLE INCINIRATIOM STANDARDS EG THE EU WASTE INCINERATION DIRECTIVE 2007/76/EC OR OTHER INTERNATIONALLY ACCEPTABLE STANDARD.
7.4. EMISSION STANDARDS: EMISSION FROM THE UNITS MUST MEET EU EMISSIONS STANDARDS FOR WASTE INCINERATORS 2007/76 .EC OR OTHER INTERLIATIONALLY ACCEPTABLE STANDARD AT AN EQUIVALENT LEVEL TO EU STANDARDS.    3  
COMBUSTION CONTROL SYSTEM :-
THE CONTROL SYSTEM SHALL INCLUDE AN ELECTRONIC PERFORMANCE MONITORING AND LOGGING SYSTEM. THE SYSTEM SHALL BE CAPABLE OF MONITORING AND LOGGING CHAMBER TEMPERATURES AT REGULAR INTERVALS (NOT LESS THAN ONCE PER MINUTE, WITH THE CAPACITY TO VARY THE LOGGING FREQUENCY). 7’1IE SYSTEM SHALL INCLUDE THE CAPACITY TO DOWNLOAD THE PERFORMANCE DATA BY USB CONNECTIORL. ALL INSTRUCTIONS SHALL BE IN ENGLISH.
ALL THE MEASURING DEVICES ATTACHED WITH THE INCINERATOR SHOULD HAVE DIGITAL DISPLAY AND SHOULD HAVE PROVISION OF CONNECTING TO THE RECORDING SYSTEM, WHICH SHOULD INCLUDE FUEL METER AND SEPARATE ENERGY METER   22  
PRIMARY COMBUSTION CHAMBER:We are china incinerator manufacturer, contractor and exporter. Manufacturer make reasonable price for incinerator customer, supply medical incinerator, hospital incinerator, animal incinerators, hog incinerators, pet cremation equipment, small incinerator, pet incinerator, animal incinerator, portable incinerator, small animal incinerator, infectious waste pyrolysis machine, laboratory incinerator. HICLOVER help customer reduce purchase budget, custom made function, quality products and friendly service.
THE INCINERATOR MUST HAVE TWO DISCRETE COMBUSTION CHAMBERS. THE PRIMARY CHAMBER MUST MEET OR EXCEED THE FOLLOWING CRITERIA:
HEAVY STEEL CONSTRUCTION.
MIXED HEARTH GEOMETRY AND STARVED AIR GASIFICATION OPERATIONAL MODE.
HOT FACE REFRACTORY CONCRETE-CERAMIC SUITABLE FOR THERMAL SHOCK UP TO 1400 CELSIUS AND ABRASION. MINIMUM THICKNESS L50MIV.
COLD FACE REFRACTORY LINING OF CALCIUM SILICATE OR SUPERIOR MATERIAL, MINIMUM THICKNESS L00MM.
REFRACTORY LINILAG OF ALL THE DUCTS SHALL BE DONE WITH REFRACTORY CASTINGS. SUPERIOR QUALITY CERAMIC WOOL SHALL BE USED AT ALL HOT DUCL FLANGES AND EXPANSION JOINTS,   25  
PRIMARY COMBUSTION CHAMBER:
  MULTIPLE ELECTRIC IGNITION FUEL BURNERS DESIGNED TO USE AUTOMOTIVE DIESELFUEL WITH ADEQUATE PROVEN CAPACITY FOR THE VOLUME OF THE PRIMARY CHAMBER.
  FLAME OF THE PRIMARY BURNER(S) SHALL BE OIIENTED TOWARDS THE CENTER OF THC UNIT WHICH DOES NOT IMPINGE DIRECTLY ON THE REFRACTORY FLOOR OR WALL. THE SECONDARY BURNER SHALL BE POSITIONED IN SUCH A WAY THAT THE FLUE GAS PASSES THROUGH THE FLAME.
T  HE TMIT SHALL PREVENT LCALTAGE OF THE HOT FLUE GAS AND ANY BACKFIRE.
AN ELECTRICALLY POWERED FAN FORCED AIR SUPPLY EITHER INTCGRATED WITHIN THE BURNER UNITS OR IF PROVEN TO BE SUPERIOR SEPARATED, WITH THE CAPACITY FOR VARIATION BY THE OPERATOR..  26  
   26 
PRIMARY COMBUSTION CHAMBER::
DIGITAL THERMOMETERS CONNECTED TO ELECTRONIC DATALOGB°’=S.THE THERMOLNETERS SHALL BE LOCATED ON THE CHAINBEL WALLS AWAY FROM THE FEEL BURNER.
A DIFFERENTIAL AIR PRESSURE GAUGE CONNECTED TO AN ELECTRONIC DATALOGGER..  27  
   27 
SECONDARY COMBUSTION CHAMBER:
  THE SECONDARY CHAMBER MUST COLNPLY WITH THE FOLLOWING MINIMUM CIITERIA:
HEAVY STEEL CONSTRUCTION
AN CXCESS AIR AND HIGH TEMPERATURE OPERATIONAL MODE.
SUFFICIENT SIZE RIND APPROPRIATE GEOMETRY T€› ACLIIEVE A GAS TEMPERATURE OF AT LEAST 850 CELSIUS FOR A RETENTION TIME OF AT LEAST 2 SECONDS WHEN PRE-HEATED AND CORRECTLY OPERATED. • SUFFICIENT FORCED AIR INFLOW AND AIRFLOW AND FUEL SUPPLY CONTROLS TO ENSURE AN EXHAUST GAS OXYGEN CONTENT RAIIGE OF 6-L2°% ALWAYS.
HOT FACE REFRACTORY CONCRETE-CERAMIC SUITABLE FOR THERMAL.SLIOCL‹ UP TO 1400 CELSIUS AND ABRASION. MINIMUM THICKNESS 150MM.
COLD FACE RERACTORY LINING OF CALCIUM SILICATE OR SUPERIOR MATERIAL, MINIMUM THICKNESS 100MM..                                      28  
SECONDARY COMBUSTION CHAMBER:
REFRACTORY LINING OF ALL THE DUCTS SHALL BE DONE WITH REFRACTORY CASTINGS. SUPERIOR QUALITY CERAMIC WOOL SHALL BE USED AT ALL HOT DUCT FLANGES AND EXPANSION JOINTS.
ONE OR MORE FUEL BURGERS DESIGNED TO USE DIESEL FUEL TYPE 2 (VEHICLE STANDARD) EQUIPPED WITH A SPARK IGNITER WITH ADEQUATE PROVEN CAPACITY FOR THE VOLUME OF.THE SECONDARY CHAMBER.
AN ELECTRICALLY POWERED FAN FORCED AIR SUPPLY, EITHER INTEGRATED WITHIN THE BURNER UNITS OF IF PROVEN TO BE SUPERIOR SEPARATED, WITH THE CAPACITY FOR VARIATIOLL BY THE OPERATOR.
ONE OR MORE FUEL.BURNERS DESIGNED TO USE DIESEL FUEL TYPE 2 (VEHICLE STANDARD) EQUIPPED WITH A SPARK IGNITER.
A DIGITAL THELMOMETER WITH CONNECTED TO AN ELECTRONIC DATALOGGER. THE THERMOMETDF SHALL BE LOCATED ON THE CHAMBER WALL AWAY FROM THE FUEL BURNER  ..29  
AIR PRE HEATING HEAT EXCHANGER
A HEAT EXCHANGER TO PRE-HEAT AIR DESTINED FOR THE PRIMARY CHAMBER IS NOT COMPULSORY BUT RECOMMENDED. UNITS FITTED WITH AIR PRE-HEAT SYSTEMS WILL BE PREFERRED DUE TO THE EXPECTED DIESEL FUEL SAVINGS..                  COMBUSTION AIR SYSTEMS AND FANS
THE COMBUSTION AIR SYSTEMS.AND FANS SHALL BE DESIGNED TO ENSURE HIGH COMBUSTION EFFICIENCY AND AVOID A REDUCING (CORROSIVE) ATMOSPHERE, INCOMPLETE BURNOUT OF THE FLUE GASES AND RELATED PROBLEMS, IT SHOULD ALSO BE POSSIBLE TO HEAT THE PRIMARY AIR FROM 10°C TO APPROXIMATELY 145°C, DEPENDING ON THE WASTE COMPOSITION AND MOISTURE CONTENT   30  
HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. We have export experience more than 40 countries, including war zone like Iraq, Afghanistan, Somalia, South Sudan.
EXHAUST AND STACK
THE INCINERATOR SHALL BE DESIGNED TO A HIGH STANDARD AND EQUIPPED TO BE INSTALLED, COMMISSIONED AND OPERATED IN SUCH A WAY AS TO PREVENT ENILSSIONS INTO THE AIR GIVING RISE TO SIGNIFICANT GROUND-LEVEL AIR POLLUTION; IN PARTICULAR, EXHAUST GASES SHALL BE DISCHARGED IN A CONTROLLED FASHION BY MEANS OF A STACLT THE HEIGHT OF WHICH IS CALCU1ATCD IN SUCH A WAY AS TO SAFEGUARD HUMAN HEALTH AND THE ENVIRONMENT.                                                                                                                                  ALL INCINERATORS SHALL MEET THE FOLLOWING EMISSION AND OPERATING STANDARDS:
COMBUSTION EFFICIENCY (C.E.) SHALL BE AT LEAST 99.0%
-THE COMBUSTION EFFICIENCY SHALL BE COMPUTED AS FOLLOWS: ‘ O C.E = (CO2 X 100) / (%CO2 +%CO).   31  
   31 
EXHAUST AND STACK
SUITABLY DESIGNED POLLUTION CONTROL DEVICES SUCH AS SCRUBBERS, FILTERS, OR ELECTROSTATIC PRECIPITATORS, SHALL BE INSTALLED/IETROFITTED WITH FLUE INCINERATOR TO ACHIEVE III STANDARD OR INTERNATIONAL EQUIVALEM EMISSION LIMITS.
EACH UNIT SHALL INCLUDE A COMPLETE VERTICAL EXHATLST AND STACLC SYSTEM, INCLUDING THE FOLLOWIG FEATURES:-
STEEL CONSTT UCTIOI3.
REFACTORY LINING IN THE LOWER SECTION.
THE EXIT HEIGHT OF THE STACK SHALL BE NOT LESS THAN 6 METERS ABOVE GROUND LEVEL DEPENDING ON THE CAPACITY OF THE INCINERATOR UNIT..   32  
AN EMISSION STACK SAMPLING PORT SHALL BE INCLUDED IMMEDIATELY ABOVE THE SECONDER Y CHAMBER.
EMISSION LEST KITS SUITABLE FOR THE UNIT SHOULD BE PROVIDED.                FEËDING
CONTROLLED HYGIENIC, MECHANICAL, OR AUTOMATIC FEEDING METHODS SHALL BE DESIGNED TO NOT NEGATIVELY INFLUENCE THE AIR SUPPLY AND TEMPERATURE IN THE PRIMARY AND SECONDARY CHAMBERS OF THE INCINERATOR.   33  
   33 
ELECTRICAL SUPPLY, GENERATION, AND WIRING:
THE WASTE INCINERATORS SLIALL BE DESIGNED FOR THE FOLLOWING ELECTRICITY SUPPLY:
3 PHASE, 4 WIRE, 415 V A.C. +-10%, 50 HZ +-3%
THE PRIMARY POWER SUPPLY SHALL BE A DIESEL ELECTRIC GENERATOR. THE SECONDARY POWER SUPPLY SHALL BE A PLUG FOR CONNECTION TO A» EXTERNALLY SUPPLIED POWER SOURCE, SUCH AS THE LOCAL GRID OR A COMPOUND SCALE MINI GRID. POWER WILL BE PROVIDED BY UNMISS.
ALL ELECTRICAL CONNECTIONS ATTACHED WITLL THE INCINERATOR AND OTHER MACHINERY SHOULD BE PROVIDED WITH SUITABLE AND NECESSARY SAFETY DEVICES AND BE PROTECTED BY STEEL CONDUITS, CABLE TRAYS, AND SUPPORTS.   34  
   34 
ELECTRICAL SUPPLY, GENERATION, AND WIRING:
THE MANUFACTURER SHOULD PERMANENTLY MARK ON THE INCINCRATOR INDICATING: (I) MANUFACTURER’S NAME OR TRADEMARK (II) STYLE, TYPE, MODEL OR, DATE OF MANUFACTURE OF THE INCINERATOR (III) CAPACITY IN TERMS OF NET DESIGNED HEAT RELEASE IN HEAT UNITS PER TIMED PERIOD (I.E., BRITISH THERMAL UNITS PER HOUR, MEGA JOUIES PER HOUR, KILOCAJORIES PER HOUR)..   35  
   35 
OPERATION STORE:
THE UNIT SHALL BE SUPPLIED WITH A LOCKABLE OPERATIONS STORE, THAT SHALL BE INITIALLY SUPPLIED WITH THE FOLLOWING CONSUMABLES:
A FIRST AID KIT, SUITABLE FOR ADDRESSING THE LIAZARDS PRESENTED BY THE UNIT.
5 FULL SETS OF PERSONAL PROTECTIVE CLOTHING AND EQUIPMENT.
OPERATING LOGBOOKS IN ENGLISH.
UNIT CLEANING EQUIPMENT.
UNIT ZOUTINE MAINTENANCE EQUIPMENT AND ASSOCIATED SPAI’E PARTS.
LUBRICANTS AS APPROPRIATE.
3 FIRE EXTINGUISHERS.
ANY OTHER CONSUMABLES CONSIDERED NECESSARY BY THE CONTRACTOR   36  
VENTURI SCRUBBER:The containerized mobile incinerator mounted in ISO container before leave factory, pre-installation, no incineration house build construction, movable by truck and ultraviolet lamp sterilization inside.
THE INCINERATOR UNIT SHALL INCLUDE A VENTURI SCRUBBER TO ENSURE THAT NO EMISSIONS ARE PRODUCED THORN INCINERATION OF SOLID WASTE AT UNMISS. THE SCRUBBER SHALL BE CONFIGURED THAT THE LIQIIID IS SPRAYED 360 DEGREES AROUND THE CHAMBER. THE VENRIRI SHALL HAVE AT LEAST THE FOLLOWING SPECIFICATIONS:
MADE OF STAINLESS STEEL
FEATURE CONTINUOUS WATER SUPPLY SYSTEM WITH THE OPTION OF ALKALINE AND CARBON OR LIME DOSING AND WATER MAINS CONNECTION
MISTING NOZZLE WITH CAPACITY OF AT LEAST 2401/H AT 70 PSI
+ FEATURE AN OUTLET WITH HEAVY DUTY BALL VALVE
ELECTRICAL CONNECTION SHALL BE 3 .PHASE, 4 WIRE, 400 V A.C. +10°%, 50 HZ +3%   37  
SUPPORT UNMISS NOMINATED PERSONNEL IN THE OPERATION AND MAINTENANCE OF THE UNIT UNTIL FULLY OPERATIONAL.   38  
   38 
INSTALLATION AND COMMISSIONING:
ASSESSING THE VOLUME AND TYPES OF WASTE AWAITING INCINERATION AND DEVELOPING AN OPERATING SCHEDULE FOR UNMISS.
ALL EQUIPMENT MANUALS SHALL BE PROVIDED IN ENGLISH AND INCLUDE FULL AIJD CLEAR INSTRUCTIONS ON COMMISSIONING, DECOMMISSIONING, CURING OF THE REFRACTORY LIMNG PRIOR TO USE AND OPERATIONS, MAINTENANCE, AND MONITORING.
UNMISS WILL PROVIDE PERSONNEL AND EQUIPMENT TO UNDERTAKE THE FOLLOWINGS. • BRING THE WASTES TO THE INCINERATOR AND LOAD.
OPERATE THE UNIT, ONCC TRAINED.
RCRRIOVE,1REAT, AND DISPOSE THE INCINERATOR ASH.
BRING DIESEL FUEL AND WATER TO THE UNIT.
COMPILE AND DELIVER THE UNIT OPERATING LOGS    39  
   39 
SPARE PARTS :  SPARE PARTS AND CONSUMABLES : THE PROPOSED INCINERATOR’ SYSTEM.SHALL INCLUDE ALL THE NECESSARY SPARE PARTS, .AND CONSUMABLCS REQUIRED FOR TWO (2) YEARS OF OPERATION. THE CONTRACTOR IS TO PROVIDE A PROPOSED A LIST OF SPARE PARTS FOR THE INCINERATORS.
MANDATORY SPARE PARTS, FOR ALL THE INCINERATORS AS A MINIMUM, ARE AS FOLLOWS:
TLIERINOCOTLPLE
TEMPERATURE GAUGE
FIRE ROPE
BURNER
INDUCTION AIR FAN (MAY BE INTEGRATED WITH BURNER)
DIGITAL TEMPERATURE DISPLAY PANEL
FUEL TANK AND PIPING KIT
ELECTRIC GENERATOR   40  
MANUFACTURING AND/OR PROCUREMENT OF THE UNIT:  
THE CONTRACTOR SHALL MANUFACTURE AND/OR PROCURE THE UNIT AS PER SPECIFICATIONS IN THIS SOR. THE CONTRACTOR SHALL ALSO CARRY OUT PARTIAL ASSEMBLY AND PRE-TESTING OF EACH OFTHC UNITS OR SELECTED COINPORLENTS AS THE CONTRACTOR SEES FIT TO ENSURE THAT THEY WILL FUNCTION AS DESIGNED UPON COMMISSIONING IN UNMISS.
THE CONTRACTOR SHALL SUBMIT THE RELEVANT TECHNICAL LIROCHURES, CATALOGUES, DRAWINGS AND ANY OTHCR RELEVANT INFORMATION WHICH SHALL INCLUDE COLORED PICTURES AS WELL AS RELEVANT TCCLINICAL DRAWINGS OF THE OFFERED ITEMS.   42  
SITE PREPARATION AND GROUNDWORKS:
UNMISS WILL PROVIDE A SMOOTH, FLAT, AND DRY WORKING AREA OF SUFFICIENT SIZE FOR INSTALLATION OF THE UNIT, AS SET OUT IN THE DETAILED DESIGN DRAWINGS PIOVIDED BY THE CONTRACTOR..  
UNPACKING, INSTALLÄTION, AND COMMISSIONING OF THE UNITS:
A PRIMARY ASPECT FOR CONSIDERATION SHALL BE THE EASE OF ASSEMBLY/DISASSEMBLY AND INSTALLATION; THEREFORE, THE REQUESTED PRODUCTS SHALL.ALLOW FOR EASY AND QUICLC INSTALLATION WITHOUT SPECIALIZED TOOLS/EQUIPMENT AND WITHOUT HIGH SKILLED MANPOWER REQUIRED, OPTIMIZING THE NUMBER OF ASSEMBLY/INSTALLATION STEPS WITH SEPARATE ITEMS REDUCED TO A PRACTICABLE, SHIPMENT WEIGHT.Our range of incinerators cater for small to large scale animal cremation related businesses, such as poultry farms, cattle farms, sheep farms, pig farms, stables, kennels, testing laboratory, catteries, pet crematoriums.
IN PARTICULAR, THE ASSEMBLY AND INSTALLATION PROCESS SHALL BE DESIGNED TO BE REVERSIBLE, TO FACILITATE RAPID DISASSEMBLING AND RE-PACLCING WITHOUT DAMAGING THE PAILS OF THE PRODUCTS ITSELF. ALL TOOLS/EQUIPMENT INCLUDED MUST BE SIMPLE TO USE, OF HIGHEST QUALITY AND MEET INTERNATIONAL STANDARDS.   44  
   44  THE DIAMETER OF THE STACK SHALL BE SELECTED BY THE .CONTRACTOR TO DELIVER AN EXHAUST EXIT VELOCITY OF NOT LESS THAN 10 METERS PER SECOND VERTICALLY UPWARDS WHEN AT FULL SCALE OPERATION.COMBUSTION CONTROL SYSTEM :-:
THE TEMPERATURE SHALL BE DETERMINED AGAINST THE INSIDE WALL OF THE COMBUSTION CHAMBERS. AN AUDIBLE AND VISIBLE ALARM SHALL BE INSTALLED TO WARN THC OPERATOR WHEN THE SECONDARY TEMPERATUI-E DROPS TO BELOW THE REQUIRED LEMPERATURE..  24  
UNPACKING, INSTALLÄTION, AND COMMISSIONING OF THE UNITS:
TEAM COMPOSITIONS AND TOOLS/EQUIPMENT LIST/DESCRIPTION SHALL BE DETAILED IN THE ASSEMBLY,
,DISASSEMBLY, AND PAC1‹ING MANUALS. PROVISION FOR THE USE OF VIDEO WEBLINKS IN ENGLISH SHOWING THE ASSEMBLY PROCESS AND, SEPARATELY, THE DISASSEMBLY.PROCESS .IS REQUIRED. MANUALS ARE TO BE PRODUCED IN ENGLISH.
IN THE.INSTALLATION, AND COMMISSIONING SUBMISSION, THE VENDORS SHOULD PROPOSE TO DEPLOY AN EXPERT INCINERATOR OPERATOR, FULLY EQUIPPED WITH ALL REQUIRED TOOLS AND EQUIPMENT, TO SUPPON UNMISS IN UN-PACKING, INSTALLATION, ARID COMMISSIONING OF THE INCINERATOR UNITS.   45  
   45 INSTALLATION AND COMMISSIONING:
THE CONTRACTOR SHALL BE RESPONSIBLE FOR AND SHALL MAKE ALL NECESSARY ARRANGEMENTS FOR PROVIDING SUFFICIENT TRAINING TO UNMISS PERSONNE} FOR THE INSTALLATION AND COMMISSIONING OF THE UNIT.
TRAINING CAN BE HELD ONLINE. THE CONTRACTOR SHALL BE AVAILABLE TO SUPPORT THE INSTALLATION AND COMMISSIONING OF’THE EQUIPMENT UNTIL THE UNIT IS FULLY OPERATIONAL.
10.1. INITIAL OPERATION, SCHEDULING, TRAINING AND SUPERVISION O’F LNIT OPERATIONS 

Special offer in Sept 2021 only, How much cost 30kgs to 50kgs per hour capacity medical waste incinerator, average 200 beded hospital?

How much cost 30kgs to 50kgs per hour capacity medical waste incinerator, average 200 beded hospital?
small scale hospital waste incinerator, for small hospital, for Covid 19 waste and PPE waste 2021
Special offer in Sept 2021 only, $7000usd per set(Diesel Oil Fuel), EXW factory term.  Contact with us with further information

Incinerator Items/Model HICLOVER TS30(PLC)
Burn Rate (Average) 30-50 kg/hour
Feed Capacity(Average) 60kg/feeding
Control Mode PLC Automatic
Combustion Chamber 330L
Internal Dimensions 75x75x60cm
Secondary Chamber 180L
Smoke Filter Chamber Yes
Feed Mode Manual
Voltage 220V 2P
Power 0.5Kw
Burner Type Italy Brand
Oil Consumption (kg/hour) 12
Gas Consumption (m3/hour) 9.8–20
Temperature Monitor Yes
Temperature Thermometer Corundum Probe Tube, 1400℃Rate.
Temperature Protection Yes
Automatic Cooling Yes
Automatic False Alarm  Yes
System Testing Model Yes
Time Setting Yes
Progress Display Bar LCD Display
Oil Tank 200L
Oil Tank Stand 190cm Height
Liquid level Display  Yes
Feeding Door 55x50cm
Chimney 5Meter
Chimney Type Stainless Steel 304 
1st. Chamber Temperature 800–1000
2nd. Chamber Temperature 1000℃-1300℃
Residency Time 2.0 Sec.
Gross Weight 3000kg
External Dimensions 175x120x140cm
1st. Chamber Composition Hot Face Thickness: ≥115 mm
55% of Al203
1750°C Grade
2nd. Chamber Composition Hot Face Thickness: ≥200 mm
75% of Al203
1790°C Grade
Chamber Cold Face Material High Rate Refractory Ceramic Fiber
Other Parts Hot Face Refractory Heavy Duty with steel fiber
Burner operation Automatic On/Off
Dry Scrubber Including
Wet Scrubber Optional
Top Loading Door Optional
Paint for outside face 250°C Grade
Sealing Material Refractory Ceramic Fiber
Upgrade Containerized Mobile Type Optional
CE Certificate CE(2006/42/EC,2014/30/EU
ISO Certificate  ISO9001:2015
High-tech Enterprise Certificate  Yes

Biomedical waste management ppt

Items/Model

TS50(PLC)

Picture

Principle

Medical Waste Incineration,dual chamber incinerator

Burn Rate

50-100 kg/hour

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

560L

Internal Dimensions

100x80x70cm

Secondary Chamber

280L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

0.7Kw

Oil Consumption (kg/hour)

average 16.9

Gas Consumption (m3/hour)

average 20.2

Temperature Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

100L

Feed Door

70x55cm

Chimney

5Meter

Chimney Type

Steel

1st. Chamber Temperature

800–1000

2nd. Chamber Temperature

1000-1200

Residency Time

2.0 Sec.

Gross Weight

4500kg

External Dimensions

230x130x155cm

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/ 

Nanjing Clover Medical Technology Co.,Ltd.

HICLOVER Incinerator/Parts Range

Main Feature

Medical Waste Incinerators

HICLOVER 10-500kgs/Hr.Double Combustion Chambers

Single Combustion Chamber

Small, Cheap,10-20kgs/Hr.

Three Combustion Chambers(Optional)

3 Chambers for high risk waste

Pet Cremation Equipment

For Pet(small/big) Cremation Business

Animal Incineration Equipment

For other animal incineration


Items/Model

TS100(PLC)

TS150(PLC)

TS300(PLC)

TS500(PLC)

Burn Rate (Average)

100 kg/hour

150 kg/hour

300 kg/hour

500 kg/hour

Control Mode

PLC Auto.

PLC Auto.

PLC Auto.

PLC Auto.

Combustion Chamber

1200L

1500L

2000L

3000L

Internal Dimensions

120x100x100cm

150x100x100cm

170x120x100cm

210x120x120cm

Secondary Chamber

600L

750L

1000L

1500L

Smoke Filter Chamber

Dry Scrubber

Dry Scrubber

Dry Scrubber

Dry Scrubber

Feed Mode

Manual

Manual

Manual

Manual

Voltage

220V

220V

220V

220V

Power

1.38Kw

1.69Kw

2.57Kw

4.88Kw

Diesel Oil Consumption (kg/hour)

Ave.20.4

Ave.24.2

Ave.33

Ave.44

Natural Gas Consumption (m3n/hour)

Ave.24.5

Ave.29

Ave.39.6

Ave.52.8

Temperature Monitor

Yes

Yes

Yes

Yes

Temperature Protection

Yes

Yes

Yes

Yes

Oil Tank

200L

300L

500L

500L

Chimney

10Meter

10Meter

14Meter

14Meter

Chimney Type

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

1st. Chamber Temperature

800–1000

800–1000

800–1000

800–1000

2nd. Chamber Temperature

1000-1200

1000-1200

1000-1200

1000-1200

Residency Time

2.0 Sec.

2.0 Sec.

2.0 Sec.

2.0 Sec.

Gross Weight

6000kg

8500kg

11000kg

16000kg

External Dimensions

260x150x180cm

300x160x190cm

400x210x300cm

450x210x300cm


No

Description

Specification

 

1

Type

Dual Chamber (Primary + Secondary Type Controlled Air Pyro Lytic Biomedical Waste Incinerator with Chimney Arrangement

yes

2

Incineration Capacity

>50 Kg. per hour

Yes, 50-100kgs/hour

3

Duration of Use

As per operational conditions

Average 10years

4

Number of Chambers

02 No.s

yes

Number of Burners per Chamber

01 No.s

yes

5

Total burners per incinerator

02 No.s

yes

6

Primary Chamber Operation Temperature

Max. 900 Degree Celsius

800-1000 Degree Celsius

7

Secondary Temperature
Operation Temperature

Max. 1075 Degree Celsius

1000-1200 Degree Celsius

Design Temperature for both chambers

Max. 1500 Degree Celsius

1750 Degree Celsius

8

Incinerator Efficiency

98-99 %

yes

9

Refractory Materials

High Alumina Refractory

High Alumina Refractory and firebrick

10

Refractory Type

Castable type

yes

11

Ash Removal

Manual Removal Drawer Tray

yes

12

Material of Construction of Chamber

IS 2062

Q235, same as IS2062

13

Type of Burner Used

Fully Automated Electrically operated burner with Head with photo cell for flame supervision Nozzle and Electrode

yes

Connection hoses , Ignitor , Pump Fan & Cabling System

yes

14

Qty.

01 No.

 

15

Power

230 / 440 V as per availability at end user

220-240V

16

Electrical Cabling

Within battery limits

Standard 3Meter

17

Refractory

 

18

Type

Castable Type

yes

19

Anchor Fasteners

AISI 316

Firebrick made,none anchors. S.S fiber 446

20

Coating on Anchors

Parafin

none

21

Alumina Percentage

40-60 %

Above 60%

22

Density

2.1 g/Cubic cm

3-3.5 g/Cubic cm

23

Service Temperature Max.

1500 Deg. Celsius

1750 Deg. Celsius

 

Insulating Castable

 

24

Type

Castable

High alumina ceramic fiber Insulation

25

CCS at 110 Degree

35-45 Kg /Sq. Cm.

None parameter

26

Grain Size

5 mm

None parameter

27

Density

1.2 gm / cm3

220kg/m3

28

Service Temperature

1350 Degree C

1260 Degree C

 

Control Panel

 

29

Degree of Ingress Protection

IP 55

yes

30

Panel MOC

SS 304

yes

31

Panel

Cabinet with Observation Glass and PLC Programmer

yes

32

Chimney

 

33

MOC

IS 2062

yes

34

Height

As per requirement

5 meter

35
36

Total Space Requirement
Completed with all Civil and Electrical

Maximum 5 Mtr. X 5 Mtr. Work

yes


 CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.
 
1. Medical Waste Incinerator(Containerized Mobile Incinerator|Top Loading Incinerator)
 
2. Auto Roll Air Filter for Clean Room

 

2021-02-23

Top Feeding Door Solid Waste Incinerators HICLOVER

HICLOVER Top Feeding Door Waste Incinerators

▲Large Feeding Door
▲Better for Animal Waste Cremation
▲HICLOVER Brand Section

***Primary Combustion Chamber
***Secondary Combustion Chamber
***Smoke Filter Chamber
***Optional Wet Scrubber System(1 section or  3 sections)

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/ 

Nanjing Clover Medical Technology Co.,Ltd.

Items Side Loading Door Top Loading Door
Cost Cheap High cost
Manufacture Tech. Easy A litter difficult
Safty safe safer
Incinerator Shape L/ I
Loading manual big door can be by Forklift
Land occupation small big
Ash door same with feeding door or alone alone
market share Most-CHINA/USA/INDIA Few- UK/USA
Dooring open type Manual Pry bar/Hydraulic pressure
Dooring Open size small big
Better for medical bag waste animal waste
open when burning safer, can feed waste, few smoke not safe, cannot feed waste, most smoke




parts of an incinerator
physical method of disposing hazardous chemical waste
portable incinerators types
proper ways of waste disposal in the community
questionnaire to ask about incinerators for collection of data

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator

 

2020-08-07

Incinerator YD-150 with Stainless Steel Wet scrubber-Cooling Spray tower

Model

YD-150

Burning Rate

Average 150 kgs/hour

Feed Capacity

Average 300 kgs/feeding

Primary Combustion Chamber

1500 Liters

Secondary Combustion Chamber

500 Liters

Mix Combustion Chamber

Yes

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V/380V

Power

1.03Kw

Fuel Type

Diesel Oil/ Natural Gas/LPG

Burner

Italy Original

Oil Consumption (Diesel Oil)

17–36 kg/hour

Gas Consumption (Natural Gas)

11–36.7 m3/hour

Internal Dimensions

150 x 100 x 96cm (primary chamber)

External Dimensions

240 x 170 x 380cm (without chimney)

Temperature Monitor

Yes

Oil Tank Capacity(if oil fuel)

300 Liters

Door Opening

59 x 81cm

Chimney Length

10.0 Meters

Chimney Type

Stainless Steel

Equipment Gross Weight

7500 kgs

before start the 2nd burner, full close all air valve on the 1st chamber. other operation keep same. 
reason: at the first 10-20 min burnning the plactic waste, deflagration combustion in the chamber. 
after 10-20 min, gradually increase air injection by air valve on the 1st chamber.
meanwhile, proposal 20-30 min burnning of the 1st chamber, stop the 1st burner(stop fire only, the fan inside the burner 
still working), let the plastic burn itself(Spontaneous combustion) to save diesel oil.
a small waste to energy project to turn municipal solid waste 

Model

YD-150

Main Product List

Primary Combustion Chamber

 

Secondary Combustion Chamber

 

Mix-Combustion Chamber

 

Smoke Filter Chamber(Dry Scrubber)

 

Incinerator Control Case(PLC Auto.Type)

 

Chimney:10.0Meters

*(upgrade to Stainless Steel, free cost)

 

Italy oil/gas burner: 02 sets

 

Oil Tank (if oil fuel): 300Liters

 

Optional Part:

Stainless Steel Wet scrubber(Cooling Spray tower)

 

into electricity. The project is to cater for a local council with a population of around 60,000 people and will serve as a 
pilot project. If project is successful than other such plants will be installed in other towns and villages. The villages 
will all cater for the MSW in their locality instead of a central large incineration plant to cate for the whole county.for a 7 ton per 
hour plant on turn-key basis with your best price and delivery including full technical specifications, literature, drawings 
and best export price.
Provided you can offer a good solution there is a chance of selling many more such plants for the local councils of the same 
country, so this is an excellent chance for you to join forces with our company for market penetration with your products in 
Europe.
1. TS100 model with dry scrubber system
2. YD150 with a wet scrubber system

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/ 

Nanjing Clover Medical Technology Co.,Ltd.


 

2020-07-14

Melt blown Production Line 400mm and 1600mm and ES Fiber Production Line and N95 Mask Machine and Disposable Mask Machine

1. N95 and Disposable Mask Machine

 

2. 400mm and 1600mm Melt blown Production Line

3. ES Fiber Production Line

 

 

 

N95 Face Mask Machine Production Line

Melt blown Production Line

 

A.)Optional Capacity: 1600mm

Efficiency: 95-97%

FOB Term Price: USD per set

Price Valid: 5days.

Ave.60 Days ready for shipping.

In stock Price: USD per set

 

 

B.)Optional Capacity: 400mm

Efficiency: 40-50% .

FOB Term Price: USD per set

Price Valid: 5days.

Ave.20 Days ready for shipping.

Payment: TT 70% In advance, TT 30% before leave factory

Shipping: 1*20′ container per set, Ave. 2000Kgs.

 

Main Parts: Extruder, mold, winder, oven, ultrasonic

Daily Capacity100-150Kgs/24Hours

Screw extruder100-150Kgs

Motor power: 15KW frequency conversion speed regulation
Reducer speed ratio: 1:10 or 1:16
Screw length to diameter ratio: 30: 1
Screw diameter: 50mm
Winding machine diameter:
630mm
Winding machine drive motor power: 0.55kw
Speed ratio of winder drive reducer (if any): 1:71
Air heater power: 15kw
Power of vacuum calciner: 12kw
The size of vacuum calciner: 500 × 300 × 200
Ultrasonic power: 1800, frequency 28kHZ
Ultrasonic sink size: 800 × 300 × 250

 

 



HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: sales@hiclover.com
Email: hicloversales@gmail.com  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-20

N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set

N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set

N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set

Dimension(L*W*H): 1037*855*1780

Power Supply 15.3kw mono phase

Net Weight: approx.: 1500kg

HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: sales@hiclover.com
Email: hicloversales@gmail.com  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-10